|
Professor/أستاذ:Mahmoud Mohamed Ibrahim Tash
|
|
Mining , Petroleum and Metallurgy
|
| | Associate Professor | |
| Email : | m.tash***psau.edu.sa |
 |
| Mobile : | 0140077502 |
| Work Phone : | 5678572 |
| Room Number : | 32305 |
| Home Phone : | 0405657528 |
| Birth Date : | 15/07/1975 |
| Home Page : | https://scholar.cu.edu.eg/?q=mtash/ |
| |
| Qualifications |
|  B.Sc. (1998) "Metallurgical Engineering" Cairo University (Egypt) |
| M.Sc. (2002) "Metallurgical Engineering" Cairo University (Egypt) |
| Ph.D. (2005) "Metallurgical Engineering" UQAC with co-direction McGill (Canada) |
|
|
| Fields of Interest : |
| Materials Science and Advanced Engineering Materials |
| Mechanical Metallurgy |
| Machinability of metals and alloys |
| Casting and Metal Forming |
| Failure Analysis and Mechanical Behavior of Engineering Materials |
| Electo- and electroless Metal Plating |
| Quality assurance and Accreditation |
| Manufacturing Processes |
|
|
| Recent Publications : |
| -2016-Development of in-Situ Al-Si/CuAl2 Metal Matrix Composites: Microstructure, Hardness, and Wear Behavior |
| -2016-Characterization of Aluminum-Based-Surface Matrix Composites with Iron and Iron Oxide Fabricated by Friction Stir Processing |
| -2016-Interrelation of Steel Composition, Hardening Route and Tempering Response of Medium Carbon Low-Alloy Steels |
| -2016-Effect of Rare Earth Metals on the Microstructure of Al-Si Based Alloys |
| -2015-Effect of alloying element and Hot Forging/Rolling Reduction Ratio on Hardness and Impact Toughness of Heat Treated Low Alloy Steels |
| -2015-Effect of Laser Speed on Hardness and Corrosion Resistance of Similar and Dissimilar Stainless and Carbon Steels Welding |
| -2015-Effect of Alloying and Thermo-Mechanical Treatment (TMT) on Hardness and Impact Toughness of Heat Treated Low Alloy Steels: Experimental Correlation |
| -2015-Correlation between Alloying Elements, Aging Parameters, Hardness and Machinability of Aluminum-Silicon Alloys Using the Model “Design of Experiments (DOE) |
| -2015-Effect of Hot Rolling Reduction Ratios (Rr) and Alloying Elements (C, Ni, Cr, Mo and V) on Hardness (HV) and Impact Toughness (J) of Heat Treated Low alloy Steels |
| -2015-Correlation between Alloying Elements and Aging Parameters and Hardness and Machinability of Aluminum-Silicon Alloys using Minitab Software |
| -2015-Effect of Thermomechanical Treatment (TMT) on Hardness, Impact Toughness of Different Grades of Low alloy Steels |
| -2015-Laser Welding of Similar Stainless Steels (304/304) and Dissimilar Stainless Steel (304)/Carbon Steel (A36) Alloys |
| -2015-Effect of Hot Forging Reduction Ratio And Heat Treatment on Hardness, Impact Toughness and Microstructure of Carbon and Alloy Steels |
| -2015-Effect of Be, Zr and Heat Treatment on Mechanical Behavior of Cast Al-Mg-Zn-Cu Alloys (7075) |
| -2015-Effect of Hot Work on Hardness and Impact Toughness of Heat Treated Low Alloy Steels |
| -2015-Experimental Correlation between Metallurgical Parameters, Hardness and Drilling Force and Moment of Al-Si Alloys |
| -2014-Effect of heat treatment Hardness of Al-Cu-Mg-Li-Zr , Al-Mg-Si and and Al-Mg-Zn alloys- Experimental Correlation Using Factorial DOE and ANOVA Methods |
| -2014-Aging and Mechanical Behavior of Be-Treated 7075 Aluminum Alloys |
| -2013-Experimental Correlation for the effect of Metallurgical Parameters on the Hardness of 356 and 319 Aluminum Alloys Using Minitab Software |
| -2013-Effect of Thermo-Mechanical Treatment (TMT) on Hardness of Heat-Treated Al-Mg-Si (6082) alloys: Experimental Correlation Using (DOE) Method |
| -2012-Machinability of Heat-Treated 356 and 319 Aluminum Alloys: Methodology for Data Processing and Calculation of Drilling Force and Moment |
| -2012-Effect of Thermomechanical Treatment on Mechanical Behaviour and Microstructure of Low Alloy Steel |
| -2011-Experimental Correlation between Metallurgical Parameters, Hardness and Machinability 319 Al-Si-Cu-Mg Alloys |
| -2008-M Tash et al. Effect of Metallurgical Differences between 356 and 384 Alloys on Their Mechanical Properties, M Tash, Waleed Khalifa, Ahmed El Hashash, MDP-9, Cairo Egypt, 2008 |
| -2008-M Tash et al. Effect of Metallurgical Differences between 356 and 384 Alloys on Their Mechanical Properties |
| -2007-Effect of Metallurgical Parameters on the Hardness and Microstructural Characterization of As-Cast and Heat-Treated 356 and 319 Aluminum Alloys, M.M Tash, F.H. Samuel, F. Mucciardi, H.W. Doty, Materials Science and Engineering A, Vol.443, 2007, pp.185-201. |
| -2006-Effect of Metallurgical Parameters on the Machinability of Heat-Treated 356 and 319 Aluminum Alloys, M.M Tash, F.H. Samuel, F. Mucciardi, H.W. Doty, Materials Science and Engineering A, Vol.434, 2006, pp.207-217. |
| -2006-Effect of Metallurgical Parameters on the Hardness of Heat-Treated 319 Alloys: Factorial Analysis and Experimental Correlation. M.M Tash, F.H. Samuel, F. Mucciardi, H.W. Doty, AFS Transactions 2006آ©American Foundary Society, Schaumburg, IL USA. |
| -2006-Correlation between Metallurgical Parameters and Machinability (Drilling Force, Moment and Heat Build-Up ) of Heat-Treated 319 Alloys Using Factorial Analysis. M.M Tash, F.H. Samuel, F. Mucciardi, H.W. Doty, ArabCast Transaction 2006, SharmEl Sheikh, Egypt. |
| -2005-Special conference for GM Powertrain Material Engineering Group, “Exploring the Metallurgical Differences Between 319 and 356 alloy on High-speed Machining Characteristicsâ€, Detroit,US,9-11 may 2005. |
| -2004-One day conference, REGAL group, “Effect of Metallurgical Parameters on the Machinability of Heat-Treated 356 and 319 Aluminum Alloysâ€, University of Laval, Quebec, Canada,2004. |
|
|
|
|