|
Associate Professor:Lamia Zaky Mohamed
|
|
Mining , Petroleum and Metallurgy
|
| Email : | lamiaa.zaky***cu.edu.eg |
 |
| |
| Qualifications |
|  B.Sc. (2003) "Metallurgical Engineering" Cairo University (Egypt) |
| M.Sc. (2010) "Metallurgical Engineering" Cairo University (Egypt) |
| Ph.D. (2017) "Metallurgical Engineering" Cairo University (Egypt) |
| Others (2023) "Metallurgical Engineering" Cairo University (Egypt) |
|
|
| Fields of Interest : |
| Metallurgical Engineering |
| Materials Science |
| Powder Metallurgy |
| Oxidation of Metals |
| Materials Characterization |
| Microstructure |
| Non-ferrous Metals |
| Advanced Materials |
| Steelmaking |
|
|
| Recent Publications : |
| -2025-Effect of deposition of Al2O3 as interdiffusion barrier on the microstructure and optical properties of Ti thin film |
| -2025-Enhancing Corrosion Behavior of T91 Steel in 3.5% NaCl through Graphene Oxide Nanocomposite Coatings |
| -2025-A comparative study of stainless steel 310 and N350 in high temperature oxidation |
| -2025-Failure Analysis of Inconel 718 Corroded Downhole Pressure Transducer |
| -2025-Effect of Chloride Salt Bath on Electrochemical Behavior and Morphology of 304L and 316L Stainless steels |
| -2025-Comprehensive corrosion evaluation of sintered Al/Ni-SiC composite by CuL2 nanocomplex as a green inhibitor in 1M HCl solution |
| -2025-Nanomaterials in biomedical applications: opportunities and challenges—a review |
| -2025-comprehensive investigation of Si additions and nanocomposite inhibitors on microstructure/corrosion performance of cast AX53 alloy in 3.5% NaCl solution |
| -2025-Corrosion characteristics of high temperature oxidized TC21 alloy in simulated body fluid containing proline coated with Nb/Ag, Journal of Materials Engineering and Performance |
| -2025-Influence of Alloying with Tantalum on the Mechanical Properties and Corrosion Behavior of Ti-6Al-7Nb-xTa Cast Alloys |
| -2025-Enhancing Corrosion Resistance of Carbidic and Austempered Carbidic Ductile Iron in Chloride Solutions via Sodium Tungstate Addition |
| -2025-Nanotechnology-Driven Innovations in Lithium-Ion Battery Anodes: Materials and Performance Insights |
| -2024-Corrosion potential and theoretical studies of fabricated Schiff base for carbidic austempered ductile iron in 1M H2SO4 solution |
| -2024-Corrosion Investigation of Carbon Steel in Different Amine-Based CO2 Removal System |
| -2024-Corrosion characteristics of Ti and Al2O3/Ti thin films sputtered on 316LSS |
| -2024-Influence of Austenite Stability on the Machinability of Different Grades of Austempered Ductile Iron (ADI) During Dry Turning Machining |
| -2024-Mechanochemical enhancement in electrode materials via silver‑embedded reduced graphene oxide and cobalt oxide nanostructure for supercapacitor applications |
| -2024-Optimizing corrosion resistance of Fe35Ni20Cr12Mn28Al5 high-entropy alloy: synergistic effect of Mo inhibitor, Al content and cold rolling |
| -2024-Corrosion resistance of nonequiatomic FeNiCrMnAlx high entropy alloys in hexamine as inhibitor in 3.5% NaCl |
| -2024-Optimizing the Corrosion Parameters and Assessing Corrosion Inhibitions for Cast Cu45Mn25Al15Fe5Cr5Ni5 HEA in Nitric Acid Solution via DOE and RSM Analysis |
| -2024-Recent Advancements in Li-ion Batteries Electrolytes: A Review |
| -2024-Effects of Niobium and Vanadium on the Properties of Porous TiMoCuAg High-Entropy Alloys |
| -2024-Evaluation of corrosion and wear features of Al matrix reinforced with particles (SiC+Y2O3) coated with either nano-Ag/Ni or nano/Ag/Cu |
| -2024-A comprehensive investigation of corrosion efficiency of Cu-10Ni alloy in hybrid Cr3+/Ni2+ with tungstate in chloride media |
| -2024-Corrosion characteristics, microstructure, and mechanical properties of welding of 304SS/308LSS/304SS using GTAW |
| -2024-Influence of Different Processes on Corrosion Performance of Al 1070 Alloy in Chloride Media |
| -2024-Fabrication and characterization of function-graded nanomaterials (Al/Al2O3) and (Al/Ni/Al2O3) using the sputtering technique |
| -2024-Characteristics of Cast Ti53.3-xNb10Zr10Ni10Co10Fe6.7Bx Compositionally Complex Alloys |
| -2024-Oxidation of Fe35Mn21Ni20Cr12Al12 High Entropy Alloy in Dry Air |
| -2023-Comparison of structure and solar-selective absorbance properties of Al2O3 thin films with Al and Ni reflector interlayers |
| -2023-Study the corrosion issues on galvanized steel induced in water tanks |
| -2023-Corrosion Inhibition of Hybrid Ti/Ce Salt for Zinc in HCl Solution |
| -2023-Physico-mechanical, microstructure, and chemical properties of Si/Ti/Nb additions to CoCrMoW medium entropy alloys |
| -2023-Comparative Studies of Cr/Ti Additions for Cu40Mn25Al20Fe5Ni5 HEA on Microstructure and Corrosion Behavior in HNO3 Solution |
| -2022-Corrosion Behavior of Coins in Artificial Sweat Solution: A Review |
| -2022-Corrosion Characteristics of 304 Stainless Steel in Sodium Chloride and Sulfuric Acid Solutions |
| -2022-Effect of Si/Ti additions on physico-mechanical and chemical properties of FeNiCrCo high entropy alloys manufactured by powder metallurgy technique |
| -2022-, Influence of the oxidation behavior of Ti–6Al–4V alloy in dry air on the oxide layer microstructure |
| -2022-Analysis of a Chain Conveyor Link Failure |
| -2022-Failure Analysis of Firefighting Pipe: Case Study |
| -2022-Studying the Microstructure, Physical and Mechanical Properties of Al Matrix Reinforced with Bi-Modal Particles Coated with Either Ni or Cu |
| -2022-, Investigating the thermal oxidation behavior of Ti–6Al–7Nb alloy in dry air |
| -2022-Corrosion Behavior of Cold-Rolled and Solution-Treated Fe36Mn20Ni20Cr16Al5Si3 HEA in Different Acidic Solutions |
| -2022-ANOVA and DOE of comparative studies of Cu/Mn effect on corrosion features of CoCrFeNi high entropy alloy immersed in different acidic media |
| -2021-Corrosion Behavior of Ni and Ni-Base Alloy in Acidic Solutions |
| -2021-Effect of Preparation Parameters and Sintering Conditions on the Properties and Microstructure of Nickel Pellets Prepared by Conventional Powder Metallurgy |
| -2021-Corrosion behavior of the pre-heated friction stir welded AA2024 alloy reinforced with AA7075 in 3.5% NaCl solution |
| -2021-Microstructure and corrosion behavior of FeNiCoCrCu and FeNiCoCrMn high entropy alloys manufactured by powder metallurgy in different acid media |
| -2021-Fabrication, Characterization, and Corrosion Behavior of a New Cu40Mn25Al20Fe5Co5Ni5 High-Entropy Alloy in HNO3 Solution |
| -2021-Performance of GO/SiO2, GO/TiO2, and GO/ZrO2 Nanocomposites Coatings as a Corrosion Barrier Layer on AlSi-Cu-Mg Alloy in 3.5 % NaCl Solution |
| -2021-Chemical, Electrochemical and Corrosive Wear Behavior of Nickel-plated Steel and Brass-plated Steel Based Coins from Egypt in Artificial Sweat |
| -2021-Corrosion behavior of Al12Cr12Fe35Mn21Ni20 high entropy alloy in different acidic media |
| -2021-Enhancement of corrosion protection of AISI 201 austenitic stainless steel in acidic chloride solutions by Ce-doped TiO2 coating |
| -2021-Experimental and theoretical studies of 2-cyano-N-(4-morpholinobenzyldine) acetohydrazide as corrosion inhibitor for galvanized steel and 304 stainless steel in 1M H2SO4 solution |
| -2020-Characteristics of Ni-Cr Binary Alloys Produced by Conventional Powder Metallurgy |
| -2020-Corrosion Behavior of Ti-7 wt.% Mn Alloy in Artificial Saliva |
| -2020-Experimental correlation using ANOVA and DOE studies on corrosion behavior of Fe and Ni-based alloy under different media |
| -2020-Effect of Sodium Tungstate on the Corrosion Behavior of Fe-Base Alloy in H2SO4 Solution |
| -2020-Oxidation Behavior of Porous Ni- 4 and 8 wt %Cr Alloys in Air at 1273K |
| -2019-Studying of Physico-Mechanical and Electrical Properties of Polypropylene/ Nano-Copper Composites for Industrial Applications |
| -2019-Corrosion Inhibition of Two Schiff Base Complexes on The Mild Steel in 1M HCl Solution |
| -2018-Oxidation Characteristics of Porous Nickel Low-Chromium Binary Alloys in Air at 1273K for 100 h |
| -2018-Oxidation characteristics of porous Ni-12 wt%Cr alloy at 1000 °C in air |
| -2017-Oxidation characteristics of porous-nickel prepared by powder metallurgy and cast-nickel at 1273 K in air for total oxidation time of 100 h |
| Recent Projects : |
| -2023-2025-Synthesizing and Characterization of Nanostructure Composite Electrodes for Applicable Li-Ion Batteries |
| -2021-2023-Prototyping a Novel and Economic Selective Solar Absorber for Maximal Harvest of Solar Thermal Energy |
| Recent Books : |
| -2024-Advancements in Materials Used in Air Conditioning Technologies, Air Conditioning Technologies and Applications |
|
|
|
|